Intumescent for fire and heat protection
Flaton-flex A, our highly flexible intumescent for fire protection. This is a material that does not break even under extreme loads, thus enabling its use even in the case of difficult geometries.
The mode of action is based on the formation of a heat-insulating foam in the event of fire. Joints, gaps and other openings are filled by the foam and prevent the passage of heat in the event of fire.
- halogen-, antimony-, silicone- and solvent-free
Fire-resistant protection in joints, gaps and other openings in components and special components.
Fields of application: doors and gates, flaps/dampers, cabinet and partition walls, safety, data and control cabinets, cable passages, ventilation flaps and other shut-off devices.
|Material thickness||1,0 mm||1,5 mm||2,0 mm|
|Basis weight||1,1 kg/m²||1,5 kg/m²||2,0 kg/m²|
|Expansion start||150 °C|
30 min. 450 °C with superimposed load
|10 to 19 times|
|Inflation pressure at 300 °C||1,2 - 2,4 N/mm²||1,4 - 2,5 N/mm²||1,6 - 2,6 N/mm²|
|Fire behavior||Building material class B2 according to DIN 4102|
|Direction of action||three-dimensional|
|Specific resistance||> 108 Ω cm|
Due to its composition, Flaton-flex A has clear advantages over the competition in the field of exterior applications.
- resistant to ageing
- water resistant
- freeze-thaw cycle resistant
up to19 fache
STRIP CUT TO250 cm
Discover our case studies.